Materia Pro Marmorino in Paste

Materia Pro Marmorino in paste is a product formed of special marble powders of different granulometries, grassello di calce and additives that give the product excellent grip on any support. Is a mineral leveling product, highly breathable for indoor and outdoor use, especially suitable for obtaining satin-finished surfaces.

Application Video

Find out how to apply


Mix the paste well with the help of a mixer drill, without adding any water.

Base preparation and application cycles

After the base preparation (brushing, scraping and acrylic insulation) apply Materia Pro Marmorino in Paste. Use a steel trowel by spreading smoothly as it was a plaster, making 2 mm depths. Pay attention to the paste smoothness because a good result can be obtained already with the first application.
After at least 24 hours apply the second layer using a trowel making a thinner layer: just make a soft pressure. Right away after, (one person spreads the product and another one smooths it), level the surface with a steel clean trowel. As the product dries, increase the pressure of the application. If done in the right moment, Materia Pro Marmorino in Paste increases its shiny effect.
If the weather is hot or in case of wide dimensions of the facade, wet the product with a water spray. If the application is outdoor, during very humid days, protect the wall for at least 3 days. The color of Materia Pro marmorino in Paste is natural that takes the hue of marble dust.
Indoors, to obtain more protection and shine, it can be treated with Materia Pro Cera Protect. Outdoors, to reduce the wet effect, you can apply after at least 10 days, Materia Pro Mirror.


Yield: 1,7 Kg/m2